What should you ask before starting a driving range project?
Before any construction begins on a driving range, the most important thing a facility owner can do is ask the right questions. These questions help avoid costly changes later, improve the player experience, and keep the project on track. The direct answer is: ask about site conditions, player circulation, range orientation, safety spacing, hitting bay design, and how the range will handle capacity over time. Each question leads to a better-built range.
What is the site telling you?
A thorough site assessment is the foundation of any good driving range construction. The land itself dictates many of the choices you will make. You need to know the soil composition, drainage patterns, and how water moves across the property during a heavy rain. If the site has uneven ground, you may need to bring in fill or excavate low spots. This affects the budget and the timeline.
Ask about the prevailing wind direction and how it changes across the year. Wind affects ball flight and where players stand. If the wind blows consistently from one direction, you might orient the range to reduce its effect on accuracy. Also ask about sun position. A range that faces directly into the afternoon sun can be uncomfortable for players and hard to read visually.
Check for underground utilities, easements, and any zoning restrictions. Some areas have noise ordinances that affect how close the range can be to homes. Others require setbacks from property lines. A good site assessment answers these questions before you order materials or dig a single hole.
How will players move through the facility?
Player circulation is more than just a path from the parking lot to the hitting bays. It includes how players enter and exit the range, how they access restrooms and concessions, and how they move between target greens. Good circulation keeps everyone safe and makes the experience feel smooth.
Ask yourself: can players walk from the parking area to the first tee without crossing in front of active hitting bays? Is there a clear route to the restrooms that stays away from the line of fire? Will players on the far end of the range have a long walk back to the clubhouse? These questions matter for daily operation and for emergency evacuation.
Consider how golf carts or utility vehicles will move around the range. If you plan to have staff pick balls or maintain target greens, they need a path that does not interfere with players. Some ranges build a separate service road behind the target greens. Others use a tunnel under the range. The choice depends on your budget and the size of the property.
What safety spacing do you need?
Safety spacing refers to the distance between hitting bays, between rows of bays, and between the bays and the targets. Getting this wrong can lead to accidents or a cramped feel that discourages repeat visits.
Ask about the minimum distance between the center of one hitting bay and the center of the next. Too close, and players feel crowded. Too far, and you waste space and reduce capacity. A common rule is to allow enough room for a player to swing freely without hitting the person next to them. But the exact spacing depends on the type of bays you choose: some have dividers, others are open.
Also ask about the distance from the hitting bays to the first target green. This distance affects the angle of the ball flight and how much room you have for different shot lengths. A range with only short distances limits practice for advanced players. A range with very long distances may be too challenging for beginners. The best ranges offer a mix of distances within a safe layout.

Safety spacing also includes the area behind the target greens. You need a buffer zone where stray balls can land without hitting anything important. This might be a net, a berm, or a combination of both. Ask what the local regulations require and what the industry standard is for your type of facility.
How should the range be oriented?
Range orientation is about more than just which direction the players face. It affects how the range fits into the surrounding property and how it feels to use.
Ask whether the range should be straight or curved. A straight range is simpler to build and maintain. A curved range can fit into an irregularly shaped piece of land and may offer more visual interest. But a curved range makes ball retrieval more complicated and may require more maintenance on the artificial turf.
Think about the view from the hitting bays. Players want to see the target greens clearly. If the range faces a bright sun, the targets can wash out. If it faces a busy road or a parking lot, players might be distracted. The best orientation places the targets in a quiet, shaded area with a consistent backdrop.
Also consider how the range will be lit for evening play. Lighting that comes from behind the players can cast shadows on the target greens. Lighting from the sides may create glare. Ask about the lighting design during the planning phase, not after the concrete is poured.
What hitting bay design fits your players?
Hitting bays come in many styles. Some are open with no dividers, which feels social and encourages group practice. Others have full-height dividers for privacy and focus. The choice depends on who you expect to use the range most.
Ask about the width and depth of each bay. A deeper bay gives the player more room to stand back from the hitting line. This can help with swing comfort but takes up more space. A narrower bay may feel restrictive for taller players or those with a long backswing.
Consider the surface material. Many driving ranges use artificial turf on the hitting bays because it holds up to heavy use and drains well. But the quality of turf varies. Ask about the pile height, the backing material, and the warranty. A low-quality turf may need replacement sooner, costing more in the long run.
Also ask about the tee system. Some ranges use rubber tees that are easy to replace. Others use a brush system that sets the ball at a consistent height. The tee system affects how players practice and how much maintenance the bays need.
Pavers and Turf by O'Neill's designs hitting bays that balance comfort with durability. Their experience in building ranges for golf and recreation facilities means they understand what works in practice. Asking about these details early helps you choose a design that matches your budget and your players' needs.
How will the range handle capacity?
Facility capacity is not just about the number of hitting bays. It is about how the range handles peak times without feeling overcrowded.
Ask about the number of target greens and how they relate to the number of bays. A range with many bays but only a few target greens can feel bottlenecked when everyone aims at the same target. A range with many target greens but too few bays may leave players waiting. The best ranges match the number of bays to the number of targets so that players have room to spread out.
Think about the flow of balls. How many balls will be in play at once? How will they be collected and returned to the players? Some ranges use a conveyor system that returns balls automatically. Others rely on staff to pick balls by hand. The system you choose affects the pace of play and the labor cost.
Also ask about the range's ability to host events. If you plan to hold tournaments or corporate outings, the range needs extra capacity for those days. This might mean building extra bays that can be closed off during regular hours, or designing the layout so that temporary bays can be added.
What about the target greens?
The target greens are where the action happens. They need to be visible, durable, and easy to maintain.
Ask about the size and shape of each target green. Standard greens are round or oval, but some ranges use irregular shapes for more variety. The green should be large enough to see from the hitting bay but not so large that every shot lands on it.

Consider the surface of the target greens. Many use artificial turf, which holds up to repeated ball strikes better than natural grass. But the turf on a target green experiences more wear than the turf on the hitting bays because balls land with more force. Ask about the thickness and the infill material. Some turfs have a sand or rubber infill that absorbs impact and extends the life of the green.
Also ask about the drainage around the target greens. Water can pool on artificial turf if the base is not graded properly. This makes the green slippery and can damage the turf over time. A good design includes a slight slope away from the green and a drainage system underneath.
Pavers and Turf by O'Neill's builds target greens that stand up to heavy use. Their knowledge of artificial grass systems means the greens stay playable in wet and dry conditions.
How will the range be maintained?
Maintenance is an ongoing cost that affects the total cost of ownership. Ask about the maintenance plan before construction begins.
What is the expected lifespan of the artificial turf on the hitting bays? On the target greens? How often should the turf be brushed or groomed to keep the fibers upright? What kind of cleaning schedule does the range need to remove debris and prevent odors?
Also ask about the ball retrieval system. If you use a conveyor system, what parts are most likely to wear out? How easy are they to replace? If you rely on staff, what is the cost of labor over a season?
Finally, ask about the warranty on the construction work. A good contractor stands behind their work for at least a few years. Knowing this upfront helps you plan for the future.
Asking these questions before construction begins saves time, money, and frustration. It ensures the driving range works well for players and for the facility owner. The answers guide every decision from site selection to the final coat of paint.